View source for FIRST Tech Challenge Blocks Programming Video Tutorials

= ''FIRST'' YouTube videos on Blocks Programming =
* [https://youtu.be/AKoqwqPo-Vc Installing Apps from Google Play]
* [https://youtu.be/BL0kvoQcjxU Connect to Programming Mode]
* [https://youtu.be/o-7z9WE6JAI Writing an Op Mode]
* [https://youtu.be/uItHYCxT9eY Saving and Running an Op Mode]
* [https://youtu.be/f8-NQIS3IEM Moving Forward and Backward]
* [https://youtu.be/PuOKjimrJ0k Turning]
* [https://youtu.be/Qd8iMiAkFGI Rotate Servos]
* [https://youtu.be/8KXQketfarE Gamepads Using Joysticks]
* [https://youtu.be/75ndVZzZJjU Gamepads Using Buttons]
* [https://youtu.be/tQW8ZG6B_bQ Gamepads Using Triggers]
* [https://youtu.be/YDEkcunllYI Save Early Save Often]
* [https://youtu.be/iQufRF1HFRc Using a Color Sensor Part 1]
* [https://youtu.be/uSEEO3_JVTI Using a Color Sensor Part 2]
* [https://youtu.be/fgGMq7ulXP4 Debugging Using Telemetry]
* [https://youtu.be/V_DsxAZvY5c Line Following]
* [https://youtu.be/kxe0NJGJL08 Using Motor Encoders]
* [https://youtu.be/xLsOI36GMe8 Ensuring Stop] -- Ensure that your robot will pass Field Inspection
* [https://youtu.be/PYrMdwrPjTs REV IMU Introduction]
* [https://youtu.be/YbXa8qn4OVE Using REV IMU for Navigation]
* [https://www.youtube.com/playlist?list=PLEuGrYl8iBm4A4yrRcatGcK7q0od0LYov YouTube Play List] that includes the videos above]

= Other Videos = 
* [https://www.youtube.com/watch?v=r2ZanwiETj0 Touch Sensor Tutorial by team Total Chaos]
* Videos by Bruce Schafer of ORTOP
** [https://youtu.be/nePIlBNepss Using FTC Blocks Programming to Recognize RELIC RECOVERY VuMarks ]
** [https://youtu.be/OMBfgO-AntY  Navigating using Motor Encoders during Autonomous Period with Blocks Programming] (There is a [https://youtu.be/kxe0NJGJL08 newer version] of this video.)
**[https://youtu.be/B6jlUCfCcxs  Following a Line during the Autonomous Period with Blocks Programming] Since posting this video the author has done some more testing. The REV color sensor is very sensitive to its distance from the mat. Slight increases or decreases in distance from the mat will change the percentage light detected. To get a good range of readings that distinguish the mat from colored tape on the mat, you may need to adjust the sensor up or down.  (There is also a [https://youtu.be/V_DsxAZvY5c newer version] of this video.)
** [https://youtu.be/h3elWCzXbDI Ensuring Your Robot Will Stop During Autonomous Period Using Blocks Programming](Helping your robot pass inspection and behave correctly on the field.)
** [https://youtu.be/VEbuvixA6iM Introduction to the REV Inertial Measurement Unit (IMU) ]
** [https://youtu.be/QwNtNGCdPHA Using the REV Hub&#8217;s Built-In Gyroscope to Control a Robot&#8217;s Path ]
** [https://youtu.be/7vrvVT_mJMk Introduction to Using Tensor Flow for Tracking Rover Ruckus Minerals ]
** [https://youtu.be/PFNcZ1Rqg6c Using Tensor Flow to Find and Grab Rover Ruckus Gold Minerals ]
** [https://youtu.be/7CRncmEenH4 Using Tensor Flow to Seek, Find and Touch a SKYSTONE ]

[[Category: FIRST Tech Challenge]]
[[Category: Videos]]