FIRST Tech Challenge Blocks Programming Video Tutorials: Difference between revisions

From ORTOP Wiki
m (Added category)
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
= ''FIRST'' YouTube videos on Blocks Programming =
= ''FIRST'' YouTube videos on Blocks Programming =
* [https://youtu.be/AKoqwqPo-Vc Installing Apps from Google Play]
 
* [https://youtu.be/BL0kvoQcjxU Connect to Programming Mode]
'''Connect to Programming Mode'''
* [https://youtu.be/o-7z9WE6JAI Writing an Op Mode]
{{#evt:
* [https://youtu.be/uItHYCxT9eY Saving and Running an Op Mode]
service=youtube
* [https://youtu.be/f8-NQIS3IEM Moving Forward and Backward]
|id=https://www.youtube.com/watch?v=BL0kvoQcjxU
* [https://youtu.be/PuOKjimrJ0k Turning]
|dimensions=240
* [https://youtu.be/Qd8iMiAkFGI Rotate Servos]
}}
* [https://youtu.be/8KXQketfarE Gamepads Using Joysticks]
 
* [https://youtu.be/75ndVZzZJjU Gamepads Using Buttons]
'''Writing an Op Mode'''
* [https://youtu.be/tQW8ZG6B_bQ Gamepads Using Triggers]
{{#evt:
* [https://youtu.be/YDEkcunllYI Save Early Save Often]
service=youtube
* [https://youtu.be/iQufRF1HFRc Using a Color Sensor Part 1]
|id=https://www.youtube.com/watch?v=o-7z9WE6JAI
* [https://youtu.be/uSEEO3_JVTI Using a Color Sensor Part 2]
|dimensions=240
* [https://youtu.be/fgGMq7ulXP4 Debugging Using Telemetry]
}}
* [https://youtu.be/V_DsxAZvY5c Line Following]
 
* [https://youtu.be/kxe0NJGJL08 Using Motor Encoders]
'''Saving and Running an Op Mode'''
* [https://youtu.be/xLsOI36GMe8 Ensuring Stop] -- Ensure that your robot will pass Field Inspection
{{#evt:
* [https://youtu.be/PYrMdwrPjTs REV IMU Introduction]
service=youtube
* [https://youtu.be/YbXa8qn4OVE Using REV IMU for Navigation]
|id=https://www.youtube.com/watch?v=uItHYCxT9eY
* [https://www.youtube.com/playlist?list=PLEuGrYl8iBm4A4yrRcatGcK7q0od0LYov YouTube Play List] that includes the videos above]
|dimensions=240
}}
'''Moving Forward and Backward'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=f8-NQIS3IEM
|dimensions=240
}}
'''Turning'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=PuOKjimrJ0k
|dimensions=240
}}
'''Rotate Servos'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=Qd8iMiAkFGI
|dimensions=240
}}
'''Gamepads Using Joysticks'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=8KXQketfarE
|dimensions=240
}}
''''Gamepads Using Buttons'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=75ndVZzZJjU
|dimensions=240
}}
'''Gamepads Using Triggers'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=tQW8ZG6B_bQ
|dimensions=240
}}
'''Save Early Save Often'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=YDEkcunllYI
|dimensions=240
}}
'''Using a Color Sensor Part 1'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=iQufRF1HFRc
|dimensions=240
}}
'''Using a Color Sensor Part 2'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=uSEEO3_JVTI
|dimensions=240
}}
'''Debugging Using Telemetry'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=fgGMq7ulXP4
|dimensions=240
}}
'''Line Following'''
'''Debugging Using Telemetry'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=V_DsxAZvY5c
|dimensions=240
}}
'''Using Motor Encoders'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=kxe0NJGJL08
|dimensions=240
}}
'''Ensure that your robot will pass Field Inspection'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=xLsOI36GMe8
|dimensions=240
}}
'''REV IMU Introduction'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=PYrMdwrPjTs
|dimensions=240
}}
'''Using REV IMU for Navigation'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=YbXa8qn4OVE
|dimensions=240
}}
'''YouTube Play List that includes the videos above'''
{{#evt:
service=youtubeplaylist
|id=https://www.youtube.com/watch?v=YbXa8qn4OVE&playlist?list=PLEuGrYl8iBm4A4yrRcatGcK7q0od0LYov
|dimensions=240
}}


= Other Videos =  
= Other Videos =  
* [https://www.youtube.com/watch?v=r2ZanwiETj0 Touch Sensor Tutorial by team Total Chaos]
==Touch Sensor Tutorial by team Total Chaos==
* Videos by Bruce Schafer of ORTOP
{{#evt:
** [https://youtu.be/nePIlBNepss Using FTC Blocks Programming to Recognize RELIC RECOVERY VuMarks ]
service=youtube
** [https://youtu.be/OMBfgO-AntY  Navigating using Motor Encoders during Autonomous Period with Blocks Programming] (There is a [https://youtu.be/kxe0NJGJL08 newer version] of this video.)
|id=https://www.youtube.com/watch?v=r2ZanwiETj0
**[https://youtu.be/B6jlUCfCcxs Following a Line during the Autonomous Period with Blocks Programming] Since posting this video the author has done some more testing. The REV color sensor is very sensitive to its distance from the mat. Slight increases or decreases in distance from the mat will change the percentage light detected. To get a good range of readings that distinguish the mat from colored tape on the mat, you may need to adjust the sensor up or down.  (There is also a [https://youtu.be/V_DsxAZvY5c newer version] of this video.)
|dimensions=240
** [https://youtu.be/h3elWCzXbDI Ensuring Your Robot Will Stop During Autonomous Period Using Blocks Programming](Helping your robot pass inspection and behave correctly on the field.)
}}
** [https://youtu.be/VEbuvixA6iM Introduction to the REV Inertial Measurement Unit (IMU) ]
 
** [https://youtu.be/QwNtNGCdPHA Using the REV Hub’s Built-In Gyroscope to Control a Robot’s Path ]
==Videos by Bruce Schafer of ORTOP==
** [https://youtu.be/7vrvVT_mJMk Introduction to Using Tensor Flow for Tracking Rover Ruckus Minerals ]
'''Using FTC Blocks Programming to Recognize RELIC RECOVERY VuMarks'''
** [https://youtu.be/PFNcZ1Rqg6c Using Tensor Flow to Find and Grab Rover Ruckus Gold Minerals ]
{{#evt:
** [https://youtu.be/7CRncmEenH4 Using Tensor Flow to Seek, Find and Touch a SKYSTONE ]
service=youtube
|id=https://www.youtube.com/watch?v=nePIlBNepss
|dimensions=240
}}
'''Following a Line during the Autonomous Period with Blocks Programming'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=B6jlUCfCcxs
|dimensions=240
}}
Since posting this video the author has done some more testing. The REV color sensor is very sensitive to its distance from the mat. Slight increases or decreases in distance from the mat will change the percentage light detected. To get a good range of readings that distinguish the mat from colored tape on the mat, you may need to adjust the sensor up or down.  (There is also a [https://youtu.be/V_DsxAZvY5c newer version] of this video.)
 
'''Ensuring Your Robot Will Stop During Autonomous Period Using Blocks Programming'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=h3elWCzXbDI
|dimensions=240
}}
Helping your robot pass inspection and behave correctly on the field.
 
'''Introduction to the REV Inertial Measurement Unit (IMU)'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=VEbuvixA6iM
|dimensions=240
}}
 
'''Using the REV Hub’s Built-In Gyroscope to Control a Robot’s Path'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=QwNtNGCdPHA
|dimensions=240
}}
 
 
'''Introduction to Using Tensor Flow for Tracking Rover Ruckus Minerals'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=7vrvVT_mJMk
|dimensions=240
}}
 
'''Using Tensor Flow to Find and Grab Rover Ruckus Gold Minerals'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=PFNcZ1Rqg6c
|dimensions=240
}}
 
'''Using Tensor Flow to Seek, Find and Touch a SKYSTONE'''
{{#evt:
service=youtube
|id=https://www.youtube.com/watch?v=7CRncmEenH4
|dimensions=240
}}
 


[[Category: FIRST Tech Challenge]]
[[Category: FIRST Tech Challenge]]
[[Category: Videos]]
[[Category: Videos]]

Latest revision as of 16:23, 21 October 2021

FIRST YouTube videos on Blocks Programming

Connect to Programming Mode

Load video
YouTube

Writing an Op Mode

Load video
YouTube

Saving and Running an Op Mode

Load video
YouTube

Moving Forward and Backward

Load video
YouTube

Turning

Load video
YouTube

Rotate Servos

Load video
YouTube

Gamepads Using Joysticks

Load video
YouTube

'Gamepads Using Buttons

Load video
YouTube

Gamepads Using Triggers

Load video
YouTube

Save Early Save Often

Load video
YouTube

Using a Color Sensor Part 1

Load video
YouTube

Using a Color Sensor Part 2

Load video
YouTube

Debugging Using Telemetry

Load video
YouTube

Line Following Debugging Using Telemetry

Load video
YouTube

Using Motor Encoders

Load video
YouTube

Ensure that your robot will pass Field Inspection

Load video
YouTube

REV IMU Introduction

Load video
YouTube

Using REV IMU for Navigation

Load video
YouTube

YouTube Play List that includes the videos above

Load video
YouTube

Other Videos

Touch Sensor Tutorial by team Total Chaos

Load video
YouTube

Videos by Bruce Schafer of ORTOP

Using FTC Blocks Programming to Recognize RELIC RECOVERY VuMarks

Load video
YouTube

Following a Line during the Autonomous Period with Blocks Programming

Load video
YouTube

Since posting this video the author has done some more testing. The REV color sensor is very sensitive to its distance from the mat. Slight increases or decreases in distance from the mat will change the percentage light detected. To get a good range of readings that distinguish the mat from colored tape on the mat, you may need to adjust the sensor up or down. (There is also a newer version of this video.)

Ensuring Your Robot Will Stop During Autonomous Period Using Blocks Programming

Load video
YouTube

Helping your robot pass inspection and behave correctly on the field.

Introduction to the REV Inertial Measurement Unit (IMU)

Load video
YouTube

Using the REV Hub’s Built-In Gyroscope to Control a Robot’s Path

Load video
YouTube


Introduction to Using Tensor Flow for Tracking Rover Ruckus Minerals

Load video
YouTube

Using Tensor Flow to Find and Grab Rover Ruckus Gold Minerals

Load video
YouTube

Using Tensor Flow to Seek, Find and Touch a SKYSTONE

Load video
YouTube
Retrieved from "https://ortop.org/wiki/index.php?title=FIRST_Tech_Challenge_Blocks_Programming_Video_Tutorials&oldid=802"